------------------------------------------------------------------------------
C32 SURFACE ELEV OR PRESSURE DEPENDENT FLOW INFORMATION
*
* IQCTLU: I INDEX OF UPSTREAM OR WITHDRAWAL CELL
* JQCTLU: J INDEX OF UPSTREAM OR WITHDRAWAL CELL
* IQCTLD: I INDEX OF DOWNSTREAM OR RETURN CELL
* JQCTLD: J INDEX OF DOWNSTREAM OR RETURN CELL
* NQCTYP: FLOW CONTROL TYPE
* = -2 FLOW AS FUNCTION OF UPSTREAM ELEVATION RATING CURVE OF A GROUP OF CELLS
* = -1 FLOW AS FUNCTION OF UPSTREAM DEPTH (STAGE RATING CURVE)
* = 0 FLOW AS FUNCTION OF ELEVATION OR PRESSURE DIFFERENCE TABLE
* = 1 SAME AS 0 WITH ACCELERATING FLOW (E.G. TIDAL INLET)
* = 2 FLOW DERIVED FROM UPSTREAM AND DOWNSTREAM WS ELEVATIONS
* = 3 LOWER CHORD OPTION USING UPSTREAM DEPTH WHEN WSEL > BQCLCE
* = 4 LOWER CHORD OPTION USING ELEVATION DIFFERENCE WHEN WSEL > BQCLCE
* = 5 CULVERT
* = 6 SLUICE GATE
* = 7 WEIR
* = 8 ORIFICE
* = 9 FLOATING SKIMMER WALL (NOT AVAILABLE)
* = 10 SUBMERGED WEIR (NOT AVAILABLE)
* NQCTLQ: ID NUMBER OF CONTROL CHARACTERIZATION TABLE
* NQCMUL: MULTIPLIER SWITCH FOR FLOWS FROM UPSTREAM CELL
* = 0 MULT BY 1. FOR CONTROL TABLE IN (L*L*L/T)
* = 1 MULT BY DY FOR CONTROL TABLE IN (L*L/T) ON U FACE
* = 2 MULT BY DX FOR CONTROL TABLE IN (L*L/T) ON V FACE
* = 3 MULT BY DX+DY FOR CONTROL TABLE IN (L*L/T) ON U&V FACES
* HQCTLU: OFFSET FOR UPSTREAM HEAD (m)
* SET TO CELL'S BOTTOM ELEVATION TO USE ELEVATION INSTEAD OF DEPTH FOR NQCTYP = -1 or 3
* HQCTLD: OFFSET FOR DOWNSTREAM HEAD (m)
* QTCLMU: MULTIPLIER TO SPLIT THE TOTAL QCTL RATING TABLE INTO CELL SPECIFIC FLOWS [ONLY USED IF NQCTYP = -2]
* QTCLGRP: NUMBER IDENTIFIER TO ASSOCIATE PHYSICALLY BASED FLOW GROUPS [ONLY USED IF NQCTYP = -2]
* BQCLCE: LOWER CHORD ELEVATION (m) [ONLY USED IF NQCTYP = 3 OR 4]
* NQCMINS: MINIMUM NUMBER OF STEPS REQUIRED ABOVE LOWER CHORD [ONLY USED IF NQCTYP = 3 OR 4]
*
* *** LOOKUP TABLE HEAD DETERMINATION (HUP & HDW) FOR LOW CHORD
* *** NQCTYP = 3: HUP = HP(LU) + HCTLUA(NCTLT) + HQCTLU(NCTL)
* *** NQCTYP = 4: HUP = HP(LU) + BELV(LU) + HCTLUA(NCTLT) + HQCTLU(NCTL)
* *** NQCTYP = 4: HDW = HP(LD) + BELV(LD) + HCTLDA(NCTLT) + HQCTLD(NCTL)
*
*HS_FACTOR: DISCHARGE DISTRIBUTION FACTOR (ONLY USED FOR NQCTYP>4)
*HS_NTIMES: NUMBER OF TIMES HYDRAULIC STRUCTURE DEFINITION CHANGES (IN DEVELOPMENT)
*HS_TRANSITION: NUMBER OF SECONDS TO TRANSITION FROM TIME (T) TO TIME (T+1) (IN DEVELOPMENT)
*GRPID: ID NUMBER OF BOUNDARY GROUP
*
C32 IQCTLU JQCTLU IQCTLD JQCTLD NQCTYP NQCTLQ NQCMUL HQCTLU HQCTLD QTCLMU QTCLGRP BQCLCE NQCMINS FACTOR NTIMES TRANSIT GRPID ! ID