------------------------------------------------------------------------------
C37 BED MECHANICAL PROPERTIES PARAMETER SET 1
* DATA REQUIRED IF NSED>0, EVEN IF ISTRAN(6) = 0
*
* SEDSTEP : SEDIMENT BED INTERACTION TIME STEP (SECONDS)
* SEDSTART: START TIME FOR BED/WATER COLUMN INTERACTION (DAYS)
* IBMECH: 0 TIME INVARIANT CONSTANT BED MECHANICAL PROPERTIES (UNIFORM BED ONLY)
* 1 SIMPLE CONSOLIDATION CALCULATION WITH CONSTANT COEFFICIENTS
* 2 SIMPLE CONSOLIDATION WITH VARIABLE COEFFICIENTS DETERMINED
* EFDC FUNCTIONS CSEDCON1,2,3(IBMECH)
* 3 COMPLEX CONSOLIDATION WITH VARIABLE COEFFICIENTS DETERMINED
* EFDC FUNCTIONS CSEDCON1,2,3(IBMECH). IBMECH > 0 SETS THE
* C38 PARAMETER ISEDBINT=1 AND REQUIRES INITIAL CONDITIONS
* FILES BEDLAY.INP, BEDBDN.INP AND BEDDDN.IN
* 9 TYPE OF CONSOLIDATION VARIES BY CELL WITH IBMECH FOR EACH
* DEFINED IN INPUT FILE CONSOLMAP.INP
* IMORPH: 0 CONSTANT BED MORPHOLOGY (IBMECH=0, ONLY)
* 1 ACTIVE BED MORPHOLOGY: NO WATER ENTRAIN/EXPULSION EFFECTS
* 2 ACTIVE BED MORPHOLOGY: WITH WATER ENTRAIN/EXPULSION EFFECTS
* HBEDMAX: TOP BED LAYER THICKNESS (m) AT WHICH NEW LAYER IS ADDED OR IF
* KBT(I,J)=KB, NEW LAYER ADDED AND LOWEST TWO LAYERS COMBINED
* BEDPORC: CONSTANT BED POROSITY (IBMECH=0, OR NSED=0)
* ALSO USED AS POROSITY OF DEPOSITION NON-COHESIVE SEDIMENT
* SEDMDMX: MAXIMUM FLUID MUD COHESIVE SEDIMENT CONCENTRATION (MG/L)
* SEDMDMN: MINIMUM FLUID MUD COHESIVE SEDIMENT CONCENTRATION (MG/L)
* SEDVDRD: VOID RATIO OF DEPOSITING COHESIVE SEDIMENT
* SEDVDRM: MINIMUM COHESIVE SEDIMENT BED VOID RATIO (IBMECH > 0)
* SEDVDRT: BED CONSOLIDATION RATE CONSTANT (sec) (IBMECH = 1,2), EXP(-DELT/SEDVDRT)
* > 0 CONSOLIDATE OVER TIME TO SEDVDRM
* = 0 CONSOLIDATE INSTANTANEOUSLY TO SEDVDRM (0.0>=SEDVDRT<=0.0001)
* < 0 CONSOLIDATE TO INITIAL VOID RATIOS
*
C37 SEDSTEP SEDSTART IBMECH IMORPH HBEDMAX BEDPORC SEDMDMX SEDMDMN SEDVDRD SEDVDRM SEDVRDT