------------------------------------------------------------------------------
C39 COHESIVE SEDIMENT PARAMETER SET 1 REPEAT DATA LINE NSED TIMES
* DATA REQUIRED IF NSED>0, EVEN IF ISTRAN(6) = 0
*
* SEDO: CONSTANT INITIAL COHESIVE SEDIMENT CONC IN WATER COLUMN
* (MG/LITER=GM/M^3)
* SEDBO: CONSTANT INITIAL COHESIVE SEDIMENT IN BED PER UNIT AREA
* (GM/SQ METER) IE 1CM THICKNESS BED WITH SSG=2.5 AND
* N=.6,.5 GIVES SEDBO 1.E4, 1.25E4
* SDEN: SEDIMENT SPEC VOLUME (IE 1/2.25E6 M^3/GM)
* SSG: SEDIMENT SPECIFIC GRAVITY
* WSEDO: CONSTANT OR REFERENCE SEDIMENT SETTLING VELOCITY
* IN FORMULA WSED=WSEDO*( (SED/SEDSN)^SEXP )
* SEDSN: (NOT USED)
* SEXP: (NOT USED)
* TAUD: BOUNDARY STRESS BELOW WHICH DEPOSITION TAKES PLACE ACCORDING
* TO (TAUD-TAU)/TAUD
* ISEDSCOR: 1 TO CORRECT BOTTOM LAYER CONCENTRATION TO NEAR BED CONCENTRATION
* ISPROBDEP: 0 KRONE PROBABILITY OF DEPOSITION USING COHESIVE GRAIN STRESS
* 1 KRONE PROBABILITY OF DEPOSITION USING TOTAL BED STRESS
* 2 PARTHENIADES PROBABILITY OF DEPOSITION USING COHESIVE GRAIN STRESS
* 3 PARTHENIADES PROBABILITY OF DEPOSITION USING TOTAL BED STRESS
*
C39 SEDO SEDBO SDEN SSG WSEDO SEDSN SEXP TAUD ISEDSCOR ISPROBDEP